Doctor Fuel 9.7" x 4.3" UV DTF Wrap

Dimensions

• 9.7 x 4.3 in

Product Materials

• PET Film

Directions

• Prepare Your Item - Make sure your item is clean and dry before starting.
• Peel the Backing - Carefully remove the protective backing from the UV DTF wrap to expose the adhesive side.
• Apply the Wrap - Position the wrap on your item exactly where you want it. Use a craft squeegee to smooth out any air bubbles or wrinkles.
• Remove the Transfer Film - Slowly peel away the transfer film, leaving the design securely on your item.
• Smooth & Secure - Use your fingers or a soft cloth to press down firmly, smoothing out any remaining bubbles for full adhesion.

Care

• To preserve the UV DTF design, wash gently by hand with mild soap and water. Avoid harsh scrubbing. UV DTF films are durable but may degrade with prolonged exposure to high temperatures. Prolonged soaking can weaken the adhesion, especially on rounded surfaces. Harsh chemicals, solvents, or alcohol-based cleaners may damage the film or cause it to peel.

Disclaimer

• This is a print-ready transfer only. The blank item shown in photos is for display purposes and is sold separately.

Country of Origin:

• China